Hydraulic drive device for turning the ball valve UGNKSH

Price on demand

Supplier: VEYA INVESTMENTS LIMITED

Description

Device for hydraulic bells and whistles of a valve of UGNX designed for freaks ball valves in the coupling of castles drill pipe for subsequent overlapping channel pipes for the elimination of open flowing borehole fluid. The scope of the devices – the Foundation of exploration, operational and located in the drilling, repair and development of wells, gas-condensate and oil fields. Modification of VHF and VHF 872-01 872-02 equipped with a floating table that provides automatic centering of the mechanism of rotation with a clutch lock. To facilitate mounting the device on the lock of the drill pipe, the device is delivered to the mouth in a partially disassembled: cross member with the clamp, the rotation mechanism and the feed screw special Assembly ball faucet, a bypass pipe.

Characteristics

Working pressure (max) in the hydraulic cylinder (hydraulic motor): 10 (21) MPa
Maximum wellhead pressure: 60/73/89 - 127/140 MPa
Dimensions (L × W × H): 930 x 500 x 425 - 1700 x 550 x 650 mm
DRILL PIPE LOCKS ACCORDING TO GOST 5286-75 ON WHICH THE DEVICE IS INSTALLED: ZN-95 / ZS-108/108-ZU / CU-120
Drill pipe locks welded in accordance with GOST R 5027892 on which the device is being installed: ZP-162-89-2 ZP-162-92 ZP-162-95-1 ZP-162-95-2 ZP-165-76 ZP-165-83 ZP-168-70
The minimum height from the end of the lock sleeve to the surface of the table rotor, at which the device can be mounted: 170-250 mm
Outside diameters of drill pipe joints: 95/108/120 - 178 mm
Outside diameters of welded drill pipe joints: 177.8 / 184.1 / 190.5 mm
When packing, nominal: 765-875 nm
Transfer type: toothed / chain
Guidance angle from home position: 90 °
Kit weight: 145-251 kg
Working fluid type: MINERAL OILS
Climatic version according to GOST 15150-69: U / UHL (ACCOMMODATION CATEGORY 1)